Latest News

Read the latest news releases and product reviews of our brands.

Media Contact

AXISS Audio USA, LLC

Media Inquiries

t. 866.295.4133

Soulution Launches New 3 Series

April 5, 2024

Dulliken (Switzerland)—Soulution is pleased to announce the 2nd generation of its 3 series product lineup. The 2nd generation of the soulution 3 series products incorporate several new technologies and designs derived from soulution’s highly praised 5 series and 7 series products.

The new 312 stereo amplifier and 331 integrated amplifier both use a new switched mode power supply for the amplifier section which can output 1’200W continuous power, like the supply for the 311 and 330, but now sports up to 4’200W of peak power for about 5 seconds. The tremendous increase of instantaneous power makes the new 3 series amplifiers sound like a much bigger amplifier. There is more control, more ease, more resolution in the base while the treble and midrange get more refined.

All small signal circuits of the new 3 series products have been optimized to now run with a frequency bandwidth of at least 2MHz which does significantly reduce the phase shifts in the audio leading to an even better definition of the sound stage and provides more focus. Reproducing musical details that are true to life and creating a three-dimensional, spatial sound to deliver a real and emotional listening pleasure.

3 Series product range (2nd generation):

  • 312 stereo amplifier
  • 326 preamplifier (optional phono & DAC inputs)
  • 331 integrated amplifier (optional phono & DAC inputs)
  • 350 Phonostage (MC)
  • 360 DAC

312 stereo amplifier

More reserves in the power supply lead to higher load stability and make the 312 stereo amplifier sound even more dynamic than its predecessor. Four new cutting-edge switched-mode power supplies modules deliver up to 4’200 VA peak power. More than 160,000 µF of storage capacitance combined with the high Class A operation results in a nearly infinite impulse response.

Key specifications

Inputs1 x balanced2kW
Outputs2 pair of LS terminals
Audio power@ 8 W120W
@ 4 W240W
@ 2 W  (< 5 sec.)480W
Frequency responseDC-800kHz
Phase shift@ 20kHz<-2°
Spot noiseInput related< – 140dBV/√Hz
Damping factor> 5’000
Start of productionQ2/2024

326 preamplifier

A preamplifier should only amplify or attenuate the music signal, not change it in any way. No distortion, no hum or noise. The solution 326 preamplifier elegantly meets these demands and now provides even less phase shift (“timing errors”) in the audio band which provides more focus and better sound staging.

Optional DAC and phono stage turn the 326 preamplifier in a versatile source component

Key specifications

Inputs2 x balanced (XLR)5.8kW
2 x unbalanced (RCA)4.9kW
Phono MC (optional)20-1’260W
DAC (optional)
Outputs1 x balanced (XLR)
1 x unbalanced (RCA)
Frequency response1 Hz – 2MHz
Phase shift@ 20kHz< – 1.5°
Spot noiseInput related< – 140dBV/√Hz
Start of productionQ2/2024

(1) Without DAC and/or phono option

331 integrated amplifier

The 331 integrated amplifier combines the features of the 312 power amplifier and the 326 preamplifier in one chassis. The increased peak power capability of the power supplies combined with the significantly reduced phase shifts in the audio band provide an exquisite sonic experience.

The optional DAC and phono stage turn the 331 integrated amplifier in an ultra high end all-in one audio component. The center of your audio system.

Key specifications

Inputs2 x balanced (XLR)5.8kW
2 x unbalanced (RCA)4.9kW
Phono MC (optional)20-1’260W
DAC (optional)
Outputs1 x balanced (XLR)Line level
2 pair of LS terminals
Audio power@ 8 W120W
@ 4 W240W
@ 2 W  (< 5 sec.)480W
Frequency response1 Hz – 800kHz
Phase shift@ 20kHz< – 3°
Spot noiseInput related< – 140dBV/√Hz
Start of productionQ2/2024

(1) Without DAC and/or phono option

350 phono stage

Delivering the required gain for vinyl playback while remaining linear and phase-correct, is still a challenging task. The new 350 phono stage masters it with ease. A two stage, active/passive, design equalizes the input signal according to the RIAA specifications. Three wide bandwidth, low noise amplifier stages provide 60dB gain with minimal deviations to the ideal frequency and phase response of the system.

Key specifications

Inputs1 x unbalanced (RCA)20-1’260W
Outputs1 x balanced (XLR)
1 x unbalanced (RCA)
GainUnbalanced+60dB @1kHz
GainUnbalanced+66dB @1kHz
Frequency response1 Hz – 2MHz
Deviation form RIAA20 Hz – 20kHz± 0.2dB
Spot noiseInput related< – 160dBV/√Hz
Start of productionQ2/2024

360 DAC

No amplifier or loud­speaker can ever make good for what has been lost at the source. The quality of the recording and the signal supplier are of fundamental importance in high fidelity. The 360 D/A-Converter does excel at exactly this task. No deletions, no additions! With its 4 digital inputs (SPDIF, AES/EBU, Network, USB) provides connectivity to a wide selection of digital sources. A powerful DSP converts all incoming digital music signals to the DXD format, performs the zeroPhase processing and the LEEDH volume control. One DAC chip in mono configuration per channel takes care of the digital to analog conversion of the music signals. The internal digital filtering of the chip is bypassed for optimal results. The passive reconstruction filter sports custom made high precision components ensuring stable filter characteristics, prerequisite for a perfect compensation with the zeroPhase technology.

Key specifications

Inputs1 × AES/EBU110W
1 × SPDIF75W
1 x USB
1 Network
Inputs formats PCM16-24bit32-192kHz
Input formats DSD1 bit2.82- 5.64MHz
Outputs1 x balanced (XLR)
1 x unbalanced (RCA)
Frequency responseDC – 200kHz
Spot noiseInput related< – 140dBV/√Hz
Start of productionQ2/2024

View All News